12V Cordless Electric Ratchet Wrench Kit 3/8 Inch Drive 60 Ft Lbs Two Batteries

What This Tool Is For

This is a cordless electric ratchet wrench with an extended 5.5-inch neck ¡ª built for jobs where a standard ratchet head will not physically reach the fastener. Engine bay bolts tucked behind components, recessed fasteners inside equipment housings, bolts at the bottom of deep cavities ¡ª this is where the extended reach makes a real difference.

The 12V motor delivers 60 ft-lbs of torque at up to 250 RPM. That is higher torque than our standard 40 ft-lbs models, which makes it more capable on moderately tight fasteners. It will still not break loose severely rusted or over-torqued bolts on its own ¡ª break those free by hand first, then use this wrench to run them out.

Where the Extended Neck Actually Helps

• Engine bay bolts recessed behind brackets or intake components
• Transmission and differential fasteners in tight housings
• Bolts at the back of appliance panels where a short head cannot reach
• Under-vehicle fasteners with limited vertical clearance
• Equipment assembly where access is restricted to a narrow opening

Key Details Worth Knowing

5.5-inch extended neck. The longer neck puts the drive head about 5.5 inches ahead of the body, clearing most brackets and surrounding components that block a standard short-head ratchet.

60 ft-lbs torque. Meaningfully higher than the standard 40 ft-lbs models. Useful when fasteners are snug but not seized. Still a cordless ratchet, not an impact wrench ¡ª not designed for high-torque breakaway work.

Variable speed trigger, 0 to 250 RPM. Lower top speed than higher-voltage models, which gives finer control. Good for threading bolts slowly into tight or awkward positions without cross-threading.

Two batteries included. One runs while the other charges. Battery indicator light shows remaining charge.

Built-in LED light. Active while the trigger is held ¡ª useful in engine bays and dark work areas.

Multiple adapters included. Comes with 3/8 to 1/4-inch and 3/8 to 1/2-inch drive adapters, plus a 3-inch extension rod, giving flexibility across different socket sizes.

Specifications

• Drive size: 3/8 inch
• Voltage: 12V
• Max torque: 60 ft-lbs (80 N.m)
• Speed range: 0 to 250 RPM
• Extended neck length: approximately 5.5 inches
• Weight with battery: approximately 3.33 lbs
• Battery: 2 x 2.0Ah lithium-ion
• Color: Yellow

What Is Included

• 1 x 12V extended ratchet wrench
• 2 x lithium-ion batteries
• 1 x charger
• 6 x sockets (10, 12, 13, 14, 15, 17mm)
• 1 x 3/8 to 1/4-inch drive adapter
• 1 x 3/8 to 1/2-inch drive adapter
• 1 x 3-inch extension rod
• 1 x carry case
• 1 x user manual

Before You Buy

This wrench uses its own proprietary 12V battery. Battery compatibility with other 12V tool brands has not been confirmed ¡ª do not assume cross-brand compatibility.

If you do not need the extended reach and prefer a lighter tool, see our standard ratchet wrench models.